Category Archives: Tutorials

ADT Pulse Web Portal User Guide

  Download Your Free User Guide Here ©2012 ADT. All rights reserved. ADT, the ADT logo, ADT Always There are registered trademarks of ADT Services AG and are used under license.  

How to Test Your Alarm System

The Importance Of Testing Your Alarm System Regularly Periodic testing of your ADT® alarm system is essential to ensure your system functions properly at all time. We advice to test your system each month. Prior to testing, make sure to

How to Change Battery in 5804 Keychain Remote?

  The 5804 is a compact, 4-button portable wireless transmitter intended for use only with wireless alarm systems that support 5800 Series receivers. The 5804 is powered by two replaceable lithium batteries designed to provide long life. INSTALLING THE BATTERIES

How to Change Battery in 5853 Glass Break Detector?

The wireless glass break detector checks for low batteries at least every 60 minutes. If a low battery is detected, the transmitter sends a low battery message to the control panel, which beeps and displays the detector’s ID. BATTERY REPLACEMENT

How to Change Battery In 5800 CO Detector?

5800CO Carbon Monoxide (CO) Detector with Built‐In Wireless Transmitter BATTERY REPLACEMENT INSTRUCTIONS Put your alarm system into TEST mode (typically by entering your user code plus the number 5 [TEST] plus the number 0 on the touchpad). The alarm sounder

How to Change Battery in 5800 Motion Detector?

  If a low battery is detected, the transmitter sends a low battery message to the control panel, which beeps and displays the detector’s zone number. In addition, the red LED of the will blink every 45 seconds and the

How to Change Battery in 5808 Smoke Detector?

The smoke detector checks for low batteries at least every 60 minutes. If a low battery is detected, the transmitter sends a low battery message to the control panel, which beeps and displays the detector’s ID. This condition will exist

How to Change Battery in Wireless Sensor?

You home security system will constantly check for low battery signal on all wireless devices. If a low battery is detected, the transmitter sends a low battery message to the control panel, which beeps and displays the detector’s zone number. Be

1 2